EVCO S.p.A. c-pro 3 | Hardware manual ver. 2.0 | Code 114CP3E204
page 72 of 86
8. ACCESSORIES
8.1. Programming kit EVIF20TUXI
8.1.1. Introduction
EVIF20TUXI is a programming kit.
Through the kit it is possible to program the controllers with the application software realized through UNI-PRO 3.
The kit is made of:
- TTL / USB isolated serial interface
- USB cable (to connect the serial interface to the Personal Computer)
- TTL cable (to connect the serial interface to the controller).
8.1.2. Description
The following drawing shows the aspect of the programming kit EVIF20TUXI.
The following table shows the meaning of the parts of the kit.
Part Meaning
1 USB cable 2 m (6 ft) long
2 TTL cable 2.5 m (8 ft) long
3 TTL port
4 TTL / USB isolated serial interface
5 USB port
To Next Page
Loading...
