Evco c-pro 3 nano Series - CAN Bus Communication Monitoring

EVCO S.p.A. c-pro 3 nano | Hardware Manual ver. 1.0 | Code 114CP3NE104
page 20 of 26
52
nEt > CAn >
CAn dbg
Networks > CAN
Bus > Debug
-
not available for
c-pro 3 nano
basic
BUS
Bus Status
- - - - CAN communication BUS status
read-only parameter
OH = ok
OK
UArn = warning
WARNING
PASS = receive mode only
PASSIVE
bOFF = off
BUS OFF
53
nEt > CAn >
CAn dbg
Networks > CAN
Bus > Debug
-
not available for
c-pro 3 nano
basic
rU
Cnt Rx
- - - - number of packages received
read-only parameter
54
nEt > CAn >
CAn dbg
Networks > CAN
Bus > Debug
-
not available for
c-pro 3 nano
basic
tU
Cnt Tx
- - - - number of packages transmitted
read-only parameter
55
nEt > CAn >
CAn dbg
Networks > CAN
Bus > Debug
-
not available for
c-pro 3 nano
basic
OuF
Cnt Ovf
- - - - number of overflow packages
read-only parameter
56
nEt > CAn >
CAn dbg
Networks > CAN
Bus > Debug
-
not available for
c-pro 3 nano
basic
PASS
Cnt Passive
- - - - number of transitions with BUS in receive mode only
read-only parameter
57
nEt > CAn >
CAn dbg
Networks > CAN
Bus > Debug
-
not available for
c-pro 3 nano
basic
bOFF
Cnt Bus Off
- - - - number of transitions with BUS off
read-only parameter
58
nEt > CAn >
CAn dbg
Networks > CAN
Bus > Debug
-
not available for
c-pro 3 nano
basic
rHEr
Cnt Rx Err
- - - - number of reception errors
read-only parameter