Evco c-pro 3 nano Series User Manual

EVCO S.p.A. c-pro 3 nano | Hardware Manual ver. 1.0 | Code 114CP3NE104
page 22 of 26
9 ACCESSORIES
9.1 0810500023
USB extension cable
Makes it possible to connect to a personal computer.
Length: 1 m (3.28 ft).
9.2 0810500025
USB extension cable
Makes it possible to connect a USB flash drive.
Length: 2 m (6.56 ft).
9.3 EVIF20SUXI
RS-485/USB serial interface
Makes it possible to connect to the Parameters Manager setup software
system.
9.4 EVIF22ISX
INTRABUS/RS-485 serial interface
Makes it possible to convert the INTRABUS signal into an RS-485 signal.
9.5 EVDFAN1
Phase cutting speed regulator for single-phase fans
Makes it possible to regulate a single-phase fan speed with a PWM command
signal.
The maximum operating current is 5 A.
9.6 EVUSB4096M
4GB USB flash drive
Makes possible quick configuration upload and download and application
software upload.
9.7 CJAV
Connection kit
Makes cabling possible.
The table below lists the kits available.
KIT SUITABLE FOR
CJAV40 c-pro 3 nano basic
CJAV41 c-pro 3 nano CAN
CJAV42 c-pro 3 nano plus

Evco c-pro 3 nano Series Specifications

General

Brand	Evco
Model	c-pro 3 nano Series
Category	Controller
Language	English