EVCO S.p.A. c-pro 3 NODE kilo+ | Hardware manual ver. 1.0 | Code 114CP3NKPE104
7 ACCESSORIES
7.1 0810500018/0810500020 connection cables
7.1.1 Preliminary notes
The cables can be used to program the devices.
The 0810500018 cable is 2,0 m (6,561 ft) long; the 0810500020 cable is 0,5 m (1,640 ft) long.
7.2 4GB EVUSB4096M USB flash drive
7.2.1 Preliminary notes
The flash drive can be used to upload and download the configuration parameters of the devices.
7.3 Non opto-isolated RS-485/USB serial interface EVIF20SUXI
7.3.1 Preliminary notes
The interface makes it possible to connect the devices to the Parameters Manager set-up software system.
page 45 of 55
To Next Page
Loading...