Evco c-pro 3 NODE kilo+ - Phase Fans; CJAV36 Connection Kit

EVCO S.p.A. c-pro 3 NODE kilo+ | Hardware manual ver. 1.0 | Code 114CP3NKPE104
7.4 Cut phase speed regulator for EVDFAN1 single-phase fans
7.4.1 Preliminary notes
The regulator is used to vary the fan speed.
It uses a PWM-type control signal with a max. operating current of 5 A.
7.5 CJAV36 connection kit
7.5.1 Preliminary notes
The kit is used to wire the devices.
page 46 of 55