Evco c-pro 3 NODE kilo+ - Analog Inputs; Outputs; Digital Outputs

EVCO S.p.A. c-pro 3 NODE kilo+ | Hardware manual ver. 1.0 | Code 114CP3NKPE104
ANALOG INPUTS / OUTPUTS
Analog inputs and outputs
Please see paragraph 6 "CONFIGURATION" for the settings of the analog inputs and outputs.
PART MEANING
GND analog inputs and outputs ground
AI7
analog input 7 settable by way of the PTC, NTC, Pt 1000 probes configuration parameter, transducers 0-20 mA, 4-20
mA, 0-5 V ratiometric or 0-10 V
AI8
analog input 8 settable by way of the PTC, NTC, Pt 1000 probes configuration parameter, transducers 0-20 mA,
4-20 mA, 0-5 V ratiometric o 0-10 V
AI9
analog input 9 settable by way of the PTC, NTC, Pt 1000 probes configuration parameter, transducers 0-20 mA,
4-20 mA, 0-5 V ratiometric o 0-10 V
AI10 analog input 10, settable by way of the PTC, NTC, Pt 1000 probes configuration parameter
GND analog inputs and outputs ground
AO4 analog output 4, settable by way of the configuration parameter for 0-20 mA, 4-20 mA or 0-10 V
AO5 analog output 5, for 0-10 V
AO6 analog output 6, for 0-10 V
DIGITAL OUTPUTS
Digital outputs.
PART MEANING
CO1 common digital output 1
NO1
usually open contact for digital output 1
according to model:
- electromechanical relay with 3 A res. @ 250 VAC
- control for 24 VAC/DC, 600 mA max. solid state relays
CO2 common digital output 1
NO2
usually open contact for digital output 2
according to model:
- electromechanical relay with 3 A res. @ 250 VAC
- control for 24 VAC/DC, 600 mA max. solid state relays
CO3-6 common digital output 3... 6
NO3 usually open contact for digital output 3 (electromechanical relay with 3 A res. @ 250 VAC)
NO4 usually open contact for digital output 4 (electromechanical relay with 3 A res. @ 250 VAC)
page 18 of 55