4746
TOC
buckle
storage
buckle
storage
You will need to remove your seat pad for cleaning.
1
Removing the Seat Pad
Carefully remove the seat pad
B
from around each
cup holder
C
.*
Unbuckle harness straps
and disconnect chest
clip.
Starting at the bottom
of the seat, unfasten
all seat pad hooks
A
.
A
3
buckle
storage
buckle
storage
B
2
Removing the Tether Strap
1
3
• To avoid a strangulation hazard, you MUST tightly roll or
fold excess tether strap and secure with the strap/rubber
band.
• Attach the tether hook to the storage clip when not in
use. This will keep an unused tether from hitting someone
during a crash.
2
Press the tab
B
and twist, then
remove the hook
from the anchor
C
.
B
C
When the tether
strap is not in use you
MUST attach the hook
D
to the back of the
child restraint, and
tightly roll and secure
the strap with the
strap/rubber band.
A loose tether strap
and hook may injure
your child.
D
The tether strap that comes with your child
restraint will be one of the two types below.
A
B
Tilt the adjuster
A
and
slide the tether strap to
loosen.
Press the adjuster release
button
B
to loosen
tether strap.
C
*Cup holders not available for all models. Styles may vary.
General
WARNING
To Next Page
Loading...
