Event Lighting DIM4 - User Manual

DIM4
4 Channel Dimming Pack
USER MANUAL
For your safety, please read this user manual carefully before initial use.
Event Lighting reserves the right to revise the manual at any time. Information and specifications
within this manual are subject to change without notice. Event Lighting assumes no liability or
responsibility for any errors or omissions. Please consult Event Lighting for any clarification or
information regarding this item.
Version: 1

Summary

Safety Instructions

General Safety Precautions

Includes warnings about not opening the device, heat, ventilation, flammables, safety chains, environmental conditions, damaged parts, grounding, and operating temperatures.

Menu Configuration

DMX Address Setting

Set the DMX address for the device, ranging from A001 to A512.

Channel Mode Selection

Choose between 1, 2, or 4 channel modes for DMX control.

Output Dimmer;Switch Mode

Toggle individual outputs between dimmer or switch operation mode.

Built-in Programs

Select and control one of the 17 built-in chase programs.

Program Speed Control

Adjust the speed for built-in programs, from SP01 to SP99.

Sound Mode Selection

Choose from 17 available sound-reactive programs.

DMX Mode Operations

DMX Channel Mode Details

Explains the 1-channel, 2-channel, and 4-channel modes for DMX control.

Output Control via DMX

Details how to control outputs as dimmers or switches using DMX values.

Technical Specifications

Power Specifications

Details input voltage, fuses, and channel output limits.

Control Features

Lists operation modes, DMX channels, interface type, and control modes.

Housing Dimensions

Provides the physical dimensions and weight of the device.

Event Lighting DIM4 Specifications

General

DMX Channels	4
Power Input	IEC
DMX Connectors	3-pin XLR
Operating Modes	DMX, Manual
Maximum Load per Channel	5A
Total Maximum Load	16A
Control Protocol	DMX512
Fuse	20A
Type	DMX Dimmer
Output	4 x
Input Voltage	240V AC, 50Hz