CONTROLS AND DISPLAY
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
TURNING YOUR DEVICE ON/OFF
Power On: Take your device out of the box and place it flat on a level surface.
Press the power button once. Check the battery LED indicator. The battery
indicator light should be lit, indicating the device is powered on.
Power Off: Press the power button once.
MAT SENSOR
There are four sensors under the foot mats on your EV5 Hoverboard. When the
user steps off the hoverboard mats, it will automatically initiate self-calibration.
When riding the hoverboard, you must ensure you are stepping on the foot mats.
Do not step or stand on any other area of your hoverboard.
Do not put items on the foot mats. Doing so will make the EV5 turn on, and
increase the probability of collision and cause injury to people, riders, or damage
the device.
BATTERY INDICATOR
The display board is located in the middle of the EV5 Hoverboard.
• Green LED light indicates the device is charged above 20 percent.
• Red LED light indicates the power is down to 10 percent or lower.
When the LED light turns red, please recharge the device.
STATUS INDICATOR
When the operator triggers the foot mats, the LED Status Indicator will
light up, which indicates that the EV5 Hoverboard is now ready for use.
When the system has an error during operation, the status LED light will
turn red (for more details see SAFETY ALERTS).
10
Https://www.LikeSporting.com
To Next Page
Loading...