CALIBRATE YOUR HOVERBOARD
Many problems that surfaces are due to misconfigurations on the gyro board.
Most often they are off balance and in that state your hoverboard does not
know if you're on a flat surface, going up/downhill or even if you are standing on
it or not.
Here are some very common problems that can be fixed by recalibrating your
hoverboard.
-The hoverboard is shaking when you mount it or go uphill. This happens more
often if it's kids who are using the hoverboard, due to their low weight the gyros
have a hard time keeping you in balance if they are not correctly configured.
-It might beep when you start it but won’t let you take off.
-You have the hoverboard in perfect balance but it still wants to spin around.
-When you ride the hoverboard straight it draws to the left/right.
There are numerous more problems that can be helped with a re-calibration of
your board and we highly recommend everyone that has a problem with their
hoverboard to test calibrating it first, before you start looking at repair options
like changing your motherboard or the gyro boards.
Step-by-step guide to calibrating your hoverboard in 10 seconds.
-Make sure your hoverboard is standing on a flat surface and with both upper
LED-indicators in level with each other.
-Press the power button and keep it depressed.
-Your hoverboards front LED-lights will flash fast 5 times before it starts blinking
with a longer interval.
-Release the button and restart your hoverboard.
You're done calibrating the gyro boards and your hoverboard is now perfectly
leveled. It now knows in what direction you're riding and what incline it's
currently going in. The best thing about a calibration problem is that it's easy to
complete and you can do it wherever you are.
15
Https://www.LikeSporting.com
To Next Page
Loading...