BLUETOOTH SPEAKER
The EV5 Hoverboard has a powerful built-in wireless speakers so you can play
your music while riding.
PAIRING THE SPEAKER
1. Ensure your EV5 Hoverboard is turned off. If it is not, please turn it off first
before pairing.
2. Turn on your EV5 and the speakers will announce that it’s waiting for a
Bluetooth connection. This will indicate your EV5 speaker is now in pairing
mode.
3. Place the EV5 and the Bluetooth device to which you would like to pair it
within the operating distance. We recommend keeping the two devices no
further than 3 feet apart during pairing.
4. Ensure Bluetooth is enabled on your phone or music device. Refer to
manufacturer’s instructions for how to enable Bluetooth on your device.
5. Once you have activated Bluetooth on your device, select the option from the
list of available Bluetooth devices.
6. Please note, pairing mode on the EV5 will last for two minutes. If no devices
are paired after two minutes, the EV5 speaker will automatically return to
standby mode.
7. If pairing is unsuccessful, turn off the EV5 first and re-pair following the
aforementioned steps.
NOTE: Once you have paired the EV5 speaker with a device, the speaker will
remember this device and will pair automatically when the device’s Bluetooth is
activated and in range. You can reconnect a previously paired device without
going through the pairing or PIN process on up to two devices.
LISTENING TO MUSIC
Once the EV5 Bluetooth speaker is paired to your device, you can stream music
wirelessly through it. Select the track you wish to listen to on your device to listen
via the speakers. All volume and track controls will be made using your music
device.
13
Https://www.LikeSporting.com
To Next Page
Loading...