Everdure 4K - Temperature Control on the 4 K; Maintaining Charcoal Temperature; Preheating the 4 K; When to Top Up Charcoal

6
Temperature control on the 4K
Maintaining charcoal temperature
As explained in this guide, heat from briquettes or lump charcoal can vary. Individual lump wood
species will have dierent densities and moisture content, producing non-identical heat output.
While the below serves as a guide, we always recommend monitoring the 4K and the heat stability
during cooking to avoid any prolonged drops in temperature.
AS A GUIDE:
If the ambient temperature is gradually falling
(loss of a few degrees over a 15min period), it is
recommended to gently maintain the
temperature by adding 1-2 pieces of charcoal via
the side reloading hatch.
If the ambient temperature is rapidly falling
(loss of +10° over a 15min period) it is
recommended to immediately add
3-4 pieces of charcoal via the side reloader
hatch, and monitor the heat rise.
We recommend the use of heat resistant gloves
when reloading charcoal.
See the conguration pages for guides on how
much charcoal to start with, according to your
cooking method.
Although it is recommended to keep the hood
open for the rst 10-15 minutes of ignition,
continuously opening and closing the hood during
preheating will result in heat loss.
After the ignition period, for best results keep the
hood closed with the suggested vent openings
on pg 7, until the 4K reaches the desired preheat
temperature, using the side reloading hatch if
necessary to top up.
Once preheated to the desired temperature, the
food can be placed inside to commence cooking.
PLEASE NOTE:
Ambient temperature and local weather conditions will also inuence the heat performance. Avoid
adding too much fuel as this will result in a temperature that may be higher than desired.
WHEN DO I TOP UP CHARCOAL?
PREHEATING THE 4K