Everdure FORCE Series - User Manual

Everdure FORCE Series

27 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

1

Assembly, Operation & Maintenance Instructions

everdurebyheston.com

FORCE

TM

FURNACE

TM

Assembly, operation &

maintenance instructions

for Everdure by Heston

Blumenthal FORCE™ &

FURNACE™ gas barbeques

and stands

Table of Contents

Questions and Answers

J
John PerezJul 28, 2025
What to do if Everdure Grill burner won't ignite?
- C
  Christopher WagnerJul 28, 2025
  If the burner on your Everdure Grill won't ignite when using the igniter, there are several potential causes. First, ensure that the cylinder valve is turned on. If it is, the cylinder might be empty and needs replacing with a full one. If the cylinder isn't the issue, the igniter might not be sparking. In this case, remove the grill/plate and visually check the electrode for a spark. Also, check the cables to the ignition point or from the valve to the chassis to ensure they haven't broken or disconnected, and verify the alignment of the sparker. Another possible cause is a blocked injector, which you can try to clean with a toothbrush. Do not drill it out or use wire, and do not remove the injector.
A
andersonsarahAug 6, 2025
Why is the burner flame erratic on my Everdure Grill?
- S
  stuart02Aug 7, 2025
  An erratic burner flame on your Everdure Grill can stem from several issues. A blocked burner might be the cause; remove the cooking surface and inspect the burner for any obstructions, then clean the ports. Alternatively, the flame might be burning inside the burner, indicated by a hissing sound. If this occurs, turn off the burner, let it cool down, and then re-ignite it following the instructions. Another potential cause is a partially blocked injector, which you can attempt to clean with a toothbrush. Do not drill it out or use wire, and do not remove the injector.
T
Thomas ZimmermanAug 17, 2025
How to fix gas leaking from Everdure Grill connections?
- J
  Joseph LucasAug 17, 2025
  If gas is leaking from the connections of your Everdure Grill, it could be due to loose connections. Try tightening them, but be careful not to over-tighten. You can also perform a leak test under pressure using a soapy water solution.

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Safety Precautions

Key safety guidelines for operating the barbeque, including usage, placement, and handling.

California Proposition 65 Warnings

Information regarding substances known to cause cancer or reproductive harm in California.

APPLIANCE DETAILS

Gas Connections

Butane & Propane Gas Requirements

Details on gas cylinder types, connections, and general requirements for safe operation.

Leak Testing Procedure

Step-by-step guide to check for gas leaks using soap solution.

Connecting the Propane Cylinder

Step-by-step guide for safely connecting the gas cylinder to the barbeque.

Outdoor Installation Guide

Operating Instructions

Gas Type and Consumption

Information on the gas type used and where to find consumption and pressure data.

Gas Control Knob Operation

Instructions on how to use the gas control knob for adjusting flame levels.

Grills and Plates

Details on the matt vitreous cast iron grills and optional solid plates for the Force and Furnace models.

Fat Tray Usage

Instructions for using and maintaining the fat tray and disposable foil trays.

Roasting Guide

Detailed procedure for roasting with the barbeque hood down, including temperature control.

Lighting Procedure

Built-in Ignition Operation

Step-by-step guide for lighting the barbeque using the control knob igniter.

Cleaning & Storage

External Cleaning

Instructions for cleaning the exterior surfaces of the barbeque and stand.

Internal Cleaning

Guidelines for cleaning the interior components, including the hood and hot plate.

Appliance Storage

Recommendations for storing the barbeque and gas cylinder safely when not in use.

Troubleshooting

Barbeque and Stand Assembly

Packaging and Parts Identification

Instructions for unpacking and identifying included parts for barbeque and stand assembly.

Maintenance

Furnace Grill Burner Tube Removal

Step-by-step guide for safely removing and inspecting burner tubes on the Furnace grill.

Force Grill Burner Tube Removal

Step-by-step guide for safely removing and inspecting burner tubes on the Force grill.

Barbeque and Hood Cleaning

Instructions for wiping down the exterior of the barbeque and hood with a clean cloth.

Stand Maintenance

Checking fasteners, cleaning the stand, and lubricating moving parts for structural integrity.

Burner and Grill Care

Flame Stability Check

Visual inspection guide for checking burner flame color and stability during operation.

Gas Grill Cleaning

Recommended methods for cleaning the gas grill using mild solutions to preserve finish.

Gas Supply and Leak Testing

General Leak Testing Procedure

Comprehensive guide for performing leak tests on gas connections before and during use.

Force Barbeque Parts List

Furnace Barbeque Parts List

Optional Accessories

Cooking Accessories

Information on available cooking accessories and where to find more details.

Everdure FORCE Series Specifications

General

Type	Gas Grill
Temperature Gauge	Yes
Model	FORCE Series
Color Options	Graphite, Mint
Fuel Type	Propane
Ignition	Electronic
Material	Die-Cast Aluminum

Related product manuals

Preview: Everdure FORCE

Preview: Everdure FUSION

Everdure FUSION

Everdure FLINDERS

Preview: Everdure E2GO

Preview: Everdure CUBE

Preview: Everdure 4K

Preview: Everdure HUB

Preview: Everdure HUB II

Everdure HUB II

Everdure MURRAY ESEE

Preview: Everdure NORFOLK

Everdure NORFOLK