What to do if my Everdure OBES63 shows Err1 error?
If your Everdure Oven displays Err1 (failure 1), it could be due to a loose thermostat cable. Check the wiring and correct it if necessary. A damaged thermostat cable may also be the cause, in which case, replace the thermostat cable. Alternatively, the thermostat contacts might be damaged, requiring you to replace the thermostat.
What to do if my Everdure Oven shows Err2 error?
If your Everdure Oven is showing Err2 (failure 2), the thermostat cable might be loose or damaged. Begin by checking the wiring and correcting it if necessary. If the cable is damaged, replace it. If the problem persists, the thermostat contacts could be damaged, and you may need to replace the thermostat.
How to fix Err3 error on my Everdure OBES63 Oven?
If your Everdure Oven displays Err3 (failure 3), the mode selector cable may be loose or damaged. First, check the wiring and correct it if it's loose. If the cable is damaged, replace it. If these steps don't resolve the issue, consider replacing the mode selector itself.
Lists error codes, causes, and solutions for OBES63.
Diagnosing and fixing fan noise or hitting cover issues.
Steps to troubleshoot a non-operational fan.
Diagnosing and fixing issues with the signal lamp.
Steps to resolve stuck digital timer buttons.
Procedure for fixing a non-functional digital timer.
Guide to diagnose and repair a non-working oven light.
Steps for diagnosing a completely non-operational oven.
Diagnosing and fixing issues with oven heating elements.
To Next Page
General
