EverFocus 410M - Warning Setup Menu

3.11 WARNING SETUP MENU
52
3.11.1 FAN FAULT
In Warning Setup Menu, you will be able to do warning setting when the following situations occur:
In FAN FAULT, we define:
(1) BUZZER: Fan buzzer.
ENABLE: To enable a buzzer when the fan does not work.
DISABLE: To disable buzzer.
(2) ALARM OUTPUT:
The setting of alarms which are NONEand 1, where 1 means the alarm is enabled.
(3) ALARM DURATION: PERMANENT
(4) NETWORK ALARM:
YES:To enable network alarm.
NO:To disable network alarm.
(5) SEND EMAIL:
YES: Send an email when the fan does not work.
NO: Do not send an email when the fan does not work.
The email address can be set in the NETWORK SETUP MENU.