To Next PageTo Next Page
Need help?Do you have a question about the EverFocus HD Series and is the answer not in the manual?
General| Brand | EverFocus |
|---|---|
| Model | HD Series |
| Category | Wireless Router |
| Language | English |
Remove the mobile DVR housing cover by unscrewing seven screws.
Locate the I/O board within the mobile DVR unit.
Attach the Metal Plate to the I/O board using Copper Pillars and Pillar Screws.
Secure the 5G WiFi Module to the Metal Plate with four Module Screws.
Connect the 5G WiFi Module to the I/O board using the Module Cable.
Connect WiFi Antennas to the 5G WiFi Module using RF Cables.
Reattach the mobile DVR housing cover after installation.
Remove the Main Board from the EMV400S FHD housing by unscrewing rear screws.
Attach the Metal Plate to the Main Board's pillars, using plastic spacers.
Mount the 5G WiFi Module onto the Metal Plate with three Module Screws.
Connect the 5G WiFi Module to the Main Board using the Module Cable.
Connect the WiFi Antennas to the 5G WiFi Module via RF Cables.
Reinsert the Main Board into the housing and secure it with four screws.
