11
8. Never wash the product by spraying or pouring
water on it! There is a risk of electrocution.
9. Do not use cut or damaged cords or extension
cords other than the original cord.
10. Make sure that there is no liquid or humidity in
the outlet where the product plug is installed.
11. The rear surface of the oven also heats up
when the oven is operated. Electrical connections
shall not touch the rear surface, otherwise the con-
nections may be damaged.
12. Do not tighten the connecting cables to the
oven door and do not run them over hot surfaces.
If the cord melts, this may cause the oven to short
circuit and even a re.
13. Unplug the unit during installation, mainte-
nance, cleaning and repair.
14. Make sure the plug is inserted rmly into wall
socket to avoid sparks.
15. Do not use steam cleaners for cleaning the ap-
pliance, otherwise electric shock may occur.
To Next Page
Loading...