12
16. An omnipolar switch capable to disconnect
power supply is required for installation. Disconne-
ction from power supply shall be provided with a
switch or an integrated fuse installed on xed power
supply according to building code.
17. Appliance is equipped with a type ‘’Y’’ cord
cable.
18. Fixed connections shall be connected to a
power supply enabling omnipolar disconnection.
For appliances with over voltage category below
III, disconnection device shall be connected to xed
power supply according to wiring code.
METHODS FOR PROTECTING CERAMIC GLASS
COOKING SURFACE
Ceramic glass surface is unbreakable and scratch
resistant to a certain degree. However, to avoid any
damage, please do the following:
1. Never pour cold water on hot cookers.
2. Do not stand on a ceramic glass plate.
To Next Page
Loading...