42
Timer Function
There are two types of timer functions;
1. Independent timer function
It may be set when the setting mode of any cooking zone is inactive.
It may be used as an alarm, too. Independent timer continues to oper-
ate when any cooking area is started to be operated.
To set the independent timer;
The appliance is turned on by pressing
the on/o key ( ). (See Fig. 15)
When the timer key ( ) is pressed, the
symbol ashes on the timer display.
(See Fig. 16)
Time may be set between 1-99 minutes
by using the rotating slide touch control
and timer keys ( ). (See Fig. 17)
IMPORTANT NOTE: When the time is set by pressing the timer key,
the time increases by 10 minutes. Therefore, a maximum of 90 min-
utes can be set by using the timer key. Slide touch control should be
used to set intermediate values.
Figure 15
Figure 16
Figure 17
To Next Page
Loading...