39
SEASONING
-Scroll the programs with (you can choose among 20 programs).
Each program is defined with:
-number (Prog 1, P01)
-total duration of seasoning cycle (32d=32 days)
P01 32d
Prog. 01
-Confirm the required program with
-Press to come back to main menu.
How to reset a program?
While a seasoning cycle is working, the display shows following information:
Set 1 F1
14d UR55% 20° C
Set 1: program 1 in execution
F1: phase 1 in execution
14d: hours/day passed from the start of the program (14 days)
UR55%: internal relative humidity
20 C: internal temperature of the cabinet
There are two options to reset a program:
A) Press for 3 seconds.
The display shows the label RELOAD and the buzzer makes a sound for 3 seconds.
The cycle is being reset and program restarts from the beginning.
B) Put the board on OFF by pressing for 3 seconds.
Press to turn the board on again.
p Alarms 09
Display of alarms occurred.
-Press ,
-Scroll the main menu with until you find the Menu 09 Alarm.
-Confirm with
-Scroll the memorized alarms list with .
Up to 32 alarms with their information can be stored:
-No alarm Stored: the display shows No Data.
-Any alarm stored: the display indicates time (14:21), date (10/10/12) and number of alarm from A01 to A32 (A01).
A01 Black Out
S 14:21 10/10/12
To Next Page
Loading...
