Display time
► With card in OFF: it is turned off.
► With card in STANDBY: displays three dashes.
► With a selected time cycle: displays the duration of the cycle.
► With a time cycle in progress: displays the time in decrease.
► In parameters setting: displays the value of the selected parameter.
► With HACCP history display: displays information about the history.
The LEDs with which the blast chiller is equipped are:
ON/OFF LED
On with card in STANDBY or ON.
STERILIZATION LED
On during a sterilization cycle.
DEFROST LED
On during a manual defrost cycle, ashing during
the counting of draining times.
HACCP LED
On while displaying the alarms history.
START/STOP LED
On during the execution of a cycle, ashing during
storage.
PROGRAMS LED
On if you are setting/selecting programs and
during the execution of one of the 99 programs.
TIME FREEZING LED
On if a negative blast chilling cycle (freezing) with
time is selected.
FREEZING TEMPERATURE LED
On if a negative blast chilling cycle (freezing) with
temperature is selected.
LED Blast chilling with positive
temperature with TIME
On if a soft or hard blast chilling cycle with time is
selected.
LED Blast chilling with positive
temperature with NEEDLE PROBE
On if a soft or hard blast chilling cycle with
temperature is selected
To Next Page
Loading...
