Do you have a question about the Eversolar Eversol-TL3200 and is the answer not in the manual?
This installation instructions describes the installation and startup of Eversolar New Energy inverters.
Only an authorized skilled electrician may install and startup the inverter.
All documents must be kept with the system and available at all times.
Lists normative references for CE marking for inverter types.
Installation must be suited to on-site conditions and comply with local regulations.
Lists safety regulations for installation and operation.
Lists the components included in the box with quantities.
Instructions for thoroughly inspecting the inverter for transport damage.
Details DC input specifications like voltage, current, and connections for inverter models.
Details AC output specifications like power, voltage, current, and power factor.
Details efficiency ratings and integrated safety features.
Provides general specifications like housing, operating temperature, IP rating, and cooling.
Guidelines for choosing a safe and suitable location for installation, including warnings.
Details the procedure for physically mounting the inverter on the wall, including drilling holes.
Explains how to connect the inverter to the PV generator (DC) and the public grid (AC).
Describes the steps to initiate the inverter's operation after installation and connection.
Covers methods for monitoring the inverter, specifically RS232 and RS485 interfaces.
Details the various internal safety protection features of the inverter.
| Type | Transformerless |
|---|---|
| Max. AC Power | 3200 W |
| Nominal AC Voltage | 230 V |
| AC Output Frequency | 50/60 Hz |
| MPPT Trackers | 1 |
| Cooling Method | Natural Convection |
| Operating Temperature Range | -25°C to +60°C |
| Protection Degree | IP65 |
| Nominal AC Power | 3.2 kW |
Loading...