4 Installation Instructions
2 Safety instructions and regulations
2.1 Technical rules
Installation must be suited to the on-site conditions and comply with local regulations
and technical rules.
2.2 Accident prevention regulations
1. Only skilled electricians who have read and fully understood all safety
information contained in these operating and installation instructions, may install
the inverter.
2. The Eversol may only be operated with PV generators. Do not connect any other
source of energy to the Eversol.
3. All covers on the unit must remain closed during operation and all screws must be
tightened.
4. Be sure that the PV generator and inverter connect to the ground in order to
protect property and persons.
5. Before opening the cabinet, the solar inverter must be disconnected from the grid
and PV generator. You must wait at least five
minutes in order that the energy storage
capacitors are fully discharged during this
period after disconnecting the inverter from the
grid and PV generator.
To Next Page
Loading...