Care 7
107678 | V1.5-10/2019 65/ 106
D. Fill the empty Everclean cleaning tank (2.1) with 25 ml Everclean
TM
(press pump once, e’2m) or with
50
ml Everclean
TM
(press pump twice, e’4m - e’6m) and place the milk in-take tube (2.2) inside of it.
E. Press Continue (3).
Cleaning in progress displays.
F. When cleaning is finished, remove and clean the cleaning tank (4).
G. Clean the milk tank tube with a damp single-use cloth (5) and replace the milk tank (6) in the
refrigerator.
H. Press Continue (7).
Fig. 7-6
Fig. 7-7
It takes approximately 12 minutes to complete the entire process.
RISK OF SCALDING OR BURNS.
Hot cleaning solution and steam are dispensed several times during the automatic cleaning.
Do not touch the outlets or the zone under the outlets.
Fig. 7-8
3
e’2m: 25 ml of Everclean (press pump once)
e’4m - e’6m: 50 ml of Everclean (press pump twice)
2.1
2.2
To Next Page
Loading...
