Eversys E4-2020 - End of the Day Guidelines; Emergency Stop

5.12. End of the day guidelines
To avoid odors and possibly sticky coee and milk residues (which might also block
the machine), make cleaning part of your daily end-of-the-day procedure.
This will ensure top quality coee and smooth operation.
Procedure
1. Clean according to the cleaning plan (page 82).
2. Switch o (page 68) at the main power switch.
a. Or standby (page 59) with the standby button.
b. Or set standby (page 79) programming (with super user access).
3. Have a nice evening ahead!
5.13. Emergency stop
Perform an emergency stop ONLY if the machine is completely stalled and does not
respond to any command.
To shut down all functions, either:
• Switch o (page 68) at the main power switch.
• Unplug the power cord from the mains socket.
The machine must be located in such a manner that the main switch and power cord
are accessible at all times.
The mains power socket must be located near the machine and must be easily
accessible by the operator.
Operation
02.01.2023 Page 69 of 172 © Eversys S.A.