Eversys E4-2020 - Clean Beneath the Machine

Enigma | Shotmaster (large drip tray with pitcher rinser)
1. Remove the drip tray grid (1).
2. Place your ngers underneath the pitcher rinser grid (2). Lift and twist to remove the grid (2).
Repeat the operation on the other grid.
3. Wash the grids and inside of the drip tray (3) with soft soap and rinse.
4. Place the pitcher rinser grid on the pitcher rinser. Using a pitcher or a cup press on the grid put it
back to its original position. Repeat the operation on the other grid.
5. Put the drip tray grid back to its original position.
Make sure that it lays nice and at.
1
2
3
7.3.8. Clean beneath the machine
1. Remove the feet covers (1) (machine option).
2. Clean beneath the machine.
The height available under the machine (h) is greater than 76 mm in compliance
with the standards in force.
3. Put the feet covers back to their original position (machine option).
1
1
1
1
h
Care
© Eversys S.A. Page 96 of 172 02.01.2023