04
7. Connect SATA power cables to all data drives or optical drives (hard drives,
solid state drives, optical drives).
8. Connect the peripheral “Molex” 4-Pin connectors for fans, pumps, legacy
components and other devices/adapters.
9. Connect the AC power cord to your power supply and to the wall. Check all
connections to assure a solid connection and turn the power switch on the
power supply to the ON position.
Installation
Q&A
Q : I see there are more than four screw holes on the back of the power supply, but the packaging only oers (4)
screws, are some missing?
A : Nothing is missing; you will only need to attach the EVGA power supply to the case with four screws. The
power supply oers more than (4) holes to provide optimal compatibility for today’s varied case designs.
Q : My EVGA Power Supply includes (2) EPS cables for my motherboard, do I need to connect up both?
A : Motherboards only require (1) 4+4 or 8-Pin EPS connection. On some models, an additional 4+4-Pin or 8-Pin
connection on the motherboard may be found for dual CPU configurations or for extreme overclocking. If your
motherboard supports dual 4+4-Pin EPS connections, please refer to your motherboard manufacturer's manual
for details on the proper function and power of the EPS connections.
Q : What if I want to use power adapters for my graphics card(s)/motherboard/peripherals?
A : EVGA always recommends the use of direct power connections from the power supply to power all components.
Q : Does it matter which end of the cable I plug into the power supply?
A : Yes, the connections going to the power supply will not have “break downs” like the EPS (CPU) has 4+4 on one
side and full 8-Pin on the other. Check each cable as it is labeled appropriately to match the power supply side,
and connect only the same ‘‘matching” cable directly to the power supply as referenced on each connector.
Q : If I have an issue or a question, can I get support?
A : ALL EVGA products are backed by top tier warranties as well as technical support. Support can be reached for
your power supply at :
- USA : +1-888-881-3842 option 1, option 3. or contact us via email at support@evga.com .
- Europe : +49 89 189 049 11 or by email via eu.evga.com/support .
To Next Page
Loading...
Need help?
General
