EVGA Z370 MICRO (121-KS-E375)
- 115 -
The non-CPU Vcore voltages do not utilize the Adaptive or Override voltage settings.
Instead, these use a pulldown menu to select preset voltages, as shown in the image
below. The voltages for these components are set by detection during POST, and E-
LEET will open the pulldown to the currently detected voltage. Please be careful when
adjusting voltages, as there are risks to running electronics out of spec. Although
EVGA warranties overclocking, other components are manufactured by different
brands (i.e. RAM and CPU), which may have different policies towards overclocking.
When your changes are complete, click “Apply Selection” at the bottom, or return to
defaults by clicking the “Restore” button.
Below is the voltage range list within E-LEET for Coffee Lake-S processors:
This has been the E-LEET
utility overview, which
should give you a solid
start to understanding and
using the E-LEET
software suite.
Target Voltage: 1.2V 1.5V 1mv 1.2V
Offset Voltage: -500mV +500mV 1mv 0V
Target Voltage: 1.0V 2.0V 1mv 1.0V
1.2V 2.0V 1mv 1.2V
1.05V 1.6V 1mv 1.05V
0.95V 1.8V 1mv 0.95V
1.0V 1.6V 1mv 1.0V
1.2V 2.0V 1mv 1.2V
1.0V 1.6V 1mv 1.0V
1.0V 1.5V 1mv 1.0V
To Next Page
Loading...
