EVGA Z370 MICRO User Manual

EVGA Z370 MICRO (121-KS-E375)
- 90 -
2. After the cards are installed, have power connected, and the SLI bridge attached,
boot into Windows. The graphics driver will normally identify the cards and
automatically configure the driver. If not, then you may need to reinstall the driver.
Once finished, you will receive a popup in the lower right corner stating that you have a
SLI capable setup and it needs to be configured. If you
did not see the message, then first verify that both cards
are detected and functioning without system errors from
Windows Device manager.
Right-click on the Start menu and select Device Manager.
Under “Display Adapters” you should see the type and
number of video cards you have installed.

EVGA Z370 MICRO Specifications

General

Brand	EVGA
Model	Z370 MICRO
Category	Motherboard
Language	English