- 4 -
Getting Started
Note:
Do not connect the power supply until all connections have been made.
Be sure to observe the color code during the connection of audio and video cables.
Connecting to External AV Source
The unit supports an AV signal input function. Use the audio/video cable to connect the
unit to an external AV signal source such as a DVD, VCR etc.
NOTE: Noise may occur in speakers when there is an external audio signal input while
playing a DVD disc. Unplug the audio cord to clear the noise.
Connecting headphone
The speaker will be turned off automatically when headphones are connected
Note: Excessively loud volume could damage your hearing. Turn down the volume
before you connect headphone, and then raise the volume to comfortable level.
To Next Page
Loading...
