To Next PageTo Next Page
Need help?Do you have a question about the Evinrude E25D and is the answer not in the manual?
General| Engine Type | 2-Stroke |
|---|---|
| Power Output | 25 HP |
| Cylinders | 2 |
| Fuel Type | Gasoline |
| Starting System | Manual or Electric |
| Full Throttle RPM Range | 4500-5500 RPM |
| Fuel Induction System | Carbureted |
| Gear Ratio | 2.15:1 |
| Alternator Output | 6 Amps |
| Shaft Length | 15 in |
| Exhaust | Through propeller hub |
| Weight | 126 lbs (57 kg) |
Symbol indicating potential personal injury hazards.
Basic rules for safe boating and operation of the outboard.
Safety precautions for outboard installation and maintenance.
Safety labels and tags on the outboard for operation guidance.
Recommended oils and specifications for Evinrude E-TEC outboards.
Information on the oiling system, warnings, and checks.
Procedure to prime the oiling system to prevent engine damage.
Recommended fuel types and octane ratings for the outboard.
Step-by-step instructions for safely fueling the boat and outboard.
Critical safety warnings for operating the outboard.
Procedures for starting and stopping the engine with tiller controls.
Procedures for starting and stopping with remote controls.
Adjusting trim angle for optimal boat performance.
Explanation of the Speed Adjusting Failsafe Electronics system.
Warning and procedures for engine overheating conditions.
Overview of the SystemCheck gauge and warnings.
Actions to take for the low oil warning.
Recommended inspection and maintenance intervals.
Step-by-step instructions for winterizing the outboard.
Detailed steps for mounting the outboard on the transom.
Selection, installation, and repair of propellers.
