Need help?Do you have a question about the Evinrude E6R4 and is the answer not in the manual?
General| Model | E6R4 |
|---|---|
| Horsepower | 6 HP |
| Manufacturer | Evinrude |
| Cylinders | 1 |
| Starting | Manual |
| Fuel Type | Gasoline |
| Fuel System | Carbureted |
| Shaft Length | 15 in |
| Gear Ratio | 2.15:1 |
| Full Throttle Operating Range | 4500-5500 RPM |
| Type | Outboard Motor |
Explains the meaning of DANGER, WARNING, CAUTION, and Note safety alert symbols used in the manual.
Details the function and safety recommendations for the emergency stop switch and tether.
Outlines operator responsibilities for safe boating and adherence to regulations.
Specifies required fuel octane and types for optimal engine performance and efficiency.
Specifies recommended engine oils and viscosity grades based on ambient temperature.
Provides a step-by-step guide for breaking in the new outboard motor and associated safety cautions.
Covers essential pre-start checks, including engine oil and fuel tank filling.
Details the correct procedures for opening and closing fuel tank caps for integral and separate tanks.
Guides on starting the engine, including attaching the stop switch tether and setting controls.
Covers actions after engine start and alternative methods for starting if the recoil starter fails.
Details the engine warm-up process and provides guidelines for selecting the correct propeller.
Explains procedures and safety warnings for shifting between forward and reverse gears.
Outlines the correct procedures for safely stopping the outboard motor.
Describes how to adjust the trim angle for efficient boat operation and stability.
Guides on tilting the motor down and operating the boat in shallow water conditions.
Lists essential daily checks for fuel, oil, electrical, and other systems with corresponding remedies.
Details the process for checking and replenishing engine oil to the correct level.
Helps diagnose and resolve issues related to engine starting, stopping, and idling.
Aids in diagnosing and resolving problems with engine performance, overheating, and cavitation.
To Next Page
