To Next PageTo Next Page
Need help?Do you have a question about the Evinrude E30D and is the answer not in the manual?
General| Engine Type | 2-Stroke |
|---|---|
| Fuel Induction System | Loop Charged |
| Recommended Fuel | 87 Octane |
| Fuel/Oil Ratio | 50:1 |
| Horsepower | 30 hp |
| Starting System | Electric |
| Gear Shift | Forward-Neutral-Reverse |
| Shaft Length | 20 in |
| Recommended Oil | Evinrude/Johnson Outboard Oil |
| Ignition System | CDI |
Explains signal words like DANGER, WARNING, CAUTION, NOTICE, and IMPORTANT used in the guide.
Provides essential rules for safe boating, including passenger knowledge and equipment readiness.
Covers fuel flammability, ventilation for carbon monoxide, and avoiding sudden weight shifts.
Details on hang tags, safety alert symbols, and decals for safe operation.
Specifies recommended Evinrude/Johnson oils and requirements for XD100 oil.
Details on priming the oil system, low oil warnings, and topping off the oil tank.
Information on recommended fuel octane, alcohol content, and approved fuel additives.
Critical safety warnings related to propellers, engine exhaust, and boat handling.
Procedure for starting and stopping the outboard using tiller controls.
Procedure for starting and stopping the outboard using remote controls.
Detailed steps for starting, checking water pump, and stopping the engine.
Guidance on adjusting the trim angle for optimal boat performance and stability.
Explanation of the Speed Adjusting Failsafe Electronics system and its warnings.
Information on engine overheating, water pump indicators, and system reset procedures.
Details on warranty duration, required maintenance, and conditions for coverage.
