01-2018 5035 01 33
DISPENSING MILK
For appliances with cappuccino makers,
beverages can be dispensed with:
-milk
-hot non-frothed milk
-hot frothed milk
Danger of scalding! Short spurts
come out of the nozzle when dispens-
the dispensing area.
milk
-The milk pump is activated and draws milk
from the container.
-The milk goes into the milker nozzle
(pushed by the milk pump) and is dis-
pensed into the cup.
Hot NoN-frotHED milk
-The steam boiler solenoid valve opens
and the milk pump is simultaneously acti-
vated.
-The milk goes into the milker nozzle
(pushed by the milk pump).
-The steam passes through the milker noz-
zle at the same time as the milk and heats
it up.
Hot frotHED milk
-The steam boiler solenoid valve and the
"air" solenoid valve open and the milk
pump is activated; the steam sucks the air
as it passes, which is mixed with the milk
being pushed by the pump.
The "air" solenoid valve is operated inter-
mittently at a determined frequency.
-The milk goes into the milker nozzle
(pushed by the milk pump).
-The steam passes through the milker noz-
zle at the same time as the milk and heats
it up.
When the milk dispensing cycle has n-
ished, the milker nozzle is partially washed
with a minimal amount of water.
DELIVERY OF HOT WATER FROM
SPOUT
Only for models with hot water spout
Scalding hazard! Short spurts of hot
water may come out of the nozzle when
hands in the dispensing area.
To release the hot water from the spout,
press the “Hot water” button.
The appliance dispenses hot water:
- until the set amount is reached.
- until the “Hot Water” button is pressed
again (stop dispensing function).
STEAM DELIVERY FROM SPOUT
Only for models with steam spout
Scalding hazard! Do not put hands
in the dispensing area during steam
release.
The steam spout is combined with a tem-
perature probe which allows to detect the
temperature of the beverage during the
heating with steam.
To release the steam from the spout, press
the “Steam” button.
To Next Page
Loading...
Need help?
General
