50 01-2018 5035 01
gENEral Display sEttiNgs
Enables / disables the display of:
-Multimedia content which is normally
available when dispensing.
-Set the touchscreen’s brightness; set it at
100 for maximum brightness.
-Displays the number of dispensing cycles
completed since the appliance has been
switched on.
-The price of the selections when operating
normally (for models with a payment sys-
tem).
-Time and date.
-Boiler temperature.
-Screensaver; when enabled, you can
enter after how long to activate the screen-
saver.
Select whether to display a screensaver or
a playlist.
playlist
Allows playlists with entertainment content
to be created and managed.
A playlist contains videos and/or image se-
quences that are played whilst the selection
is being dispensed.
If a playlist only contains images, you
can indicate after how long to show the
next image.
adds videos or images to the playlist.
copies the playlist.
deletes the playlist.
A name must be assigned to a new playlist.
The playlist contents can be played in the
following modes: random
or cyclic .
iNput sENsor sEttiNgs
The functional unit allows the operation of
some of the appliance's sensors to be set.
coNtaiNEr lEvEl
Enables/ disables the container level con-
trol.
The container level is calculated. The
amount of product used in the recipe is
subtracted from the container's capacity.
In order to correctly manage the level, indi-
cate (every time the products are loaded)
the amount of product that has been loaded
into the container.
The various containers with their lling
levels and adjustable parameters are dis-
played:
-Calculated amount: enables the counter
which manages the "product running out"
warnings.
-Total capacity: set the maximum container
capacity in grams.
-Threshold value: set the warning threshold
in grams.
The level of the containers can be
window.
soliD rEsiDuEs
Enables/ disables the solid residue counter
which manages the "residue container full"
warning.
-Set the maximum capacity of the solid res-
idue container; the capacity is expressed
in number of selections.
-Set the warning threshold (expressed in
number of selections).
The level of the residue containers can
window.
To Next Page
Loading...
