EVOCA Kalea - ENERGY SAVING MODE; SETTINGS; “SOFT MODE” PROFILE; “DEEP MODE” PROFILE

01-2018 5035 01 59
ENERGY SAVING MODE
The appliance's energy saving function can
be enabled, its parameters modied and its
time frames set.
sEttiNgs
Enables / disables power saving features.
The appliance can manage various energy
saving proles.
Some of the parameters in every energy
saving prole can be customised.
“soft moDE” profilE
This prole enables the energy saving
mode after the appliance has a period of
inactivity.
When a selection is requested, the ma-
chine exits the energy saving mode.
It is possible to:
-Set after how many minutes of appliance
inactivity to activate the energy saving
profile.
-Set the maintenance temperature of the
boiler(s) in the energy saving mode.
-Enable/ disable the appliance’s lighting.
-Select the touchscreen brightness level
from those that have been predefined.
“DEEp moDE” profilE
This prole is active during the set time
frames.
During the set time frames, the boiler tem-
perature is lowered and the maintenance
temperature is set.
It is possible to:
-Set by how many minutes to advance the
boiler’s heating before the end of the of the
time frame.
E.g. 5 minutes: 5 minutes before the end
of the time frame, the boiler heating cycle
is activated in order to reach the operating
temperature.
-Set the maintenance temperature of the
boiler(s) in the energy saving mode.
-Enable/ disable the appliance’s lighting.
-Select the touchscreen brightness level
from those that have been predefined.