01-2018 5035 01 63
pricE pEr timE framE
Allows the time frames (standard or promo-
tional) to be set for sales at dierentiated
prices.
-Tap the day for which the time frames will
be set.
-Tap the “add” button then the line of the
time frame in order to position a rectangle
indicating the time.
-Drag the rectangle to precisely define the
time.
To eliminate a rectangle, tap the “remove”
button, then tap the rectangle to be elimi-
nated.
Settings made for the entire week or a sin-
gle day can be copied.
Tap “Copy day” to be able to:
-Copy the time frames that have been set
for a single day of the week; tap the day to
set the energy saving mode to and then
tap “paste day”.
-Copy the time frames that have been set
for all days of the week; tap “paste to all
days”.
Fig. 42
Includes all the export and import statistic
functions, machine settings, graphics pack-
ages, etc.
Eva-Dts
Allows EVA-DTS data to be exported onto
a USB stick and/or onto data transmission
devices (RS232, IrDA, telemetry, etc.).
usb
Saves a EVA-DTS le onto the USB stick.
sErial commuNicatioN protocol
From this function it is possible to decide
which communication protocol to use for
communication with the data acquisition
devices.
DDcmp - EDDcmp
These have the following congurable pa-
rameters:
-Baud rate: is the transmission speed to
be used in communications between the
appliance and data acquisition devices.
-Pass code: this is a code which must be
the same as the data transfer terminal, in
order to be identified.
The default setting is 0.
-Security code: this is a code for mutual
recognition between the appliance and the
EVA-DTS terminal.
The default setting is 0.
-End of transmission: if enabled, it can
identify the end of transmission signal
(EOT) which is sent with the last packet
and interrupt the data transmission.
DEx/ucs
These have the following congurable pa-
rameters:
-Baud rate: is the transmission speed to
be used in communications between the
appliance and data acquisition devices.
To Next Page
Loading...
