68 01-2018 5035 01
softwarE upDatE
Shows the software version of the appli-
ance.
It also allows the appliance’s software to be
updated via a USB stick or via a network
connection.
upDatiNg via a usb
The appliance’s software can be updated
via a USB stick.
-Insert the USB stick which contains the
new software.
-Browse the le system of the USB stick
and select the le with the software up-
date.
iNformatioN
Allows all of the information regarding the
appliance’s software to be viewed (version,
graphic theme used, machine congura-
tion, etc.).
CONNECTIVITY
The equipment is able to send notications
(via email) regarding events and faults.
connection.
-
tions. It is impossible to receive emails
on the equipment.
Enable the function to allow the setting of
parameters for email delivery.
The parameters vary depending on the
email server used (e-mail service provider
The equipment provides a set of precong-
ured parameters for the major email service
providers on the Internet.
It is possible to manually enter the email
parameters for the other email service pro-
viders on the Internet or for email servers
on the LAN network (custom preset).
For email servers on the LAN net-
-
appropriate email parameters.
For Internet email service providers,
you need to contact the email service
provider support or support services in
order to have access to the appropriate
email parameters.
You can enter and delete email addresses
to which you intend to send notications.
After setting the parameters, you can send
a test email to verify the correct congura-
tion.
EvENt NotificatioN
Enable the events for which you want to re-
ceive notications (e.g., access to menus,
sanitization operations, ...)
fault NotificatioN
Enable the faults for which you want to
receive notications (e.g., no coee, no
water, etc.)
To Next Page
Loading...
