HAZEBOX 1500 Manual Ver. 1.00 Page 8
Make sure to re-cap the powder container before using your machine (risk of fire).
Make sure the sparks do not hit any object.
Perform a cleaning cycle regularly (at least once every 4 uses).
The power cord can be used to chain up to 6 machines. Please never exceed this number.
Never obstruct the spark projection opening.
Make sure that the machine is operated in a well ventilated environment.
Introduction
Thank you for selecting this professional Haze Machine from evolite.
This item will provide you reliability, latest features, and professional effects for a long period of time.
This evolite item is complying with European standards: EN 2014/30/EU, EN 2011/65/EU, EN 2014/35/EU.
Device description
> Professional spark machine
> Use with Evo Spark Powder from Evolite only
> 2 DMX channels
> Heating time: 3 minutes
> Heating body: 1500W
> Continuous spark production over 30 sec max
> Max flow: from 1 to 6 meters of projection
> DMX power control
> Fuse: 6A / 230V
> Voltage: AC230V, 50Hz
> Power consumption: 650W / 2.3A
> Packaging size: 305x305x340mm
> Gross Weight: 6.7 kg
> Net weight: 5.9 kg
Control Panel :
READY: The machine is ready to operate
DMX: When this LED flashes blue, it means the machine is receiving a DMX signal
FAULT: Error, the machine cannot operate
HEAT: Pre-heating of the machine in progress.
When the machine is heating up, the display shows the temperature reached.
To Next Page
Loading...
