ASSEMBLING THE BASSINET
1. Take product from carton box. Hold the central supporting
structure (A) and turn the leg outward until hear the locking click on
the top hinges. Repeat with the other leg as shown below.
2. Insert the side rail into the middle support frame (B) by lining up
the buttons and holes, until you hear a “Click”, like shown below.
3. Select the middle support frame (B) and gently push it into the
side slots as per image with curved bar facing down as shown
below.
4. You will hear the frame click into position once in place.
Make sure both sides are securely locked into place.
DO NOT use bedside sleeper
if any parts are missing, damaged, or broken. Contact Evolur
for replacement parts and instructions if needed. DO NOT
substitute parts.
To Next Page
Loading...
