DURING USE, MAKE SURE THAT THE ADULT BED SHEETS,
BLANKETS ETC, DO NOT ENTER THE CO-SLEEPER AND
COVER THE INTERIOR OF THE CO-SLEEPER. THIS CAN
CAUSE SUFFOCATION.
1. Unzip the sides of the co-sleeper until they are completely
unzipped.
2. Slide the top bar lock lever away from the top bar and lift top bar out of
groove on both sides and fold down.
THE HEAD OF THE CHILD SHOULD ALWAYS BE
POSITIONED ON THE HIGHEST SIDE.
THIS FUNCTION IS ONLY MEANT FOR THE
BEDSIDE SLEEPER IN BASSINET MODE.
CO-SLEEP MODE (FIXING TO THE BED)
CHECK TO MAKE SURE THAT THE BEDSIDE SLEEPER IN
THE CO-SLEEPER MODE DOES NOT INTERFERE WITH THE
ADULT BED.
THIS METHOD IS ONLY COMPATABLE WITH BED TYPES
THAT COMPLY WITH ALL OF THE CONDITIONS DESCRIBED
HERE:
• THE SIDE SUPPORT OF THE CO-SLEEPER SHOULD
ALWAYS BE PLACED CLOSE TO THE ADULT
MATTRESS.
• THE MATTRESS SHOULD ALWAYS BE ALIGNED WITH
THE HEIGHT OF THE SIDE SUPPORT OF THE CO-
SLEEPER.
• THE CO-SLEEPER SHOULD BE FIRMLY FIXED TO THE
STRUCTURE OF THE ADULT BED OR TO THE
MATTRESS SUPPORT.
To Next Page
Loading...
