14
www.evolutionpowertools.com
(9.11)
7) SAFETY STRAP OR SAFETY CHAIN
WARNING: The electromagnet base on
this power tool can deactivate if the
power supply is interrupted or suffers
an electrical malfunction.
• To prevent possible operator injury, the
safety strap or chain supplied should be
used at all times to provide extra security
in the event of supply failure or electrical
malfunction.
Note: When drilling some very large flat,
horizontal plates, the fitting of the safety
strap or chain may be impossible. Consult the
responsible person for guidance.
• The safety strap or chain should be
attached to the fixing points provided and
checked for security before commencing
any and every drilling operation.
(4.1)
GETTING STARTED UNPACKING
Caution: This packaging contains sharp objects.
Take care when unpacking. This machine
could require two persons to lift, assemble and
move. Remove the machine, together with the
accessories supplied from the packaging. Check
carefully to ensure that the machine is in good
condition and account for all the accessories
listed in this manual. Also make sure that all the
accessories are complete. If any parts are found
to be missing, the machine and its accessories
should be returned together in their original
packaging to the retailer. Do not throw the
packaging away; keep it safe throughout the
guarantee period. Dispose of the packaging
in an environmentally responsible manner.
Recycle if possible. Do not let children play with
empty plastic bags due to the risk of suffocation.
(4.2)
ITEMS SUPPLIED
Description Quantity
Instruction Manual 1
Coolant Tank System 1
Handles 3
Safety Strap 1
Safety Guard 1
Safety Guard Fixing Screws 2
Hex Key 2.5mm 1
Hex Key 4mm 1
Hex Key 5mm 1
Chuck with Chuck Key 1
Carry Case 1
(4.3)
ADDITIONAL ACCESSORIES
In addition to the accessories supplied with
this machine the following accessories are
available from Evolution’s online shop at
www.evolutionpowertools.com or from
your local retailer.
(4.4)
Description
3 Piece Cutter Kit
6 Piece Cutter Kit
Cyclone Cutters
To Next Page
Loading...
Need help?
General
