Evolution BORA 2800 User Manual

8
www.evolutionpowertools.com
(1.8)
LABELS & SYMBOLS
WARNING: Do not operate this machine if
warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools
for replacement labels.
Note: All or some of the following symbols
may appear in the manual or on the product.
SYMBOL DESCRIPTION
V
Volts
A
Amperes
Hz
Hertz
Min
-1
Speed
~
Alternating Current
n
o
No Load Speed
Eye protection should be
worn at all times when
using this tool.
Hard Hat - Head protection
should be worn at all times
whilst using this tool, to protect
from overhead hazards.
Ear protection / Ear defenders
should be worn at all times
whilst using this tool.
This tool exceeds 85dB(A).
Wear Dust Protection
Electrical enclosure -
risk of electric shock.
Read and understand
the instruction manual -
before operating this tool.
Warning
Fuse
CE certification
CSA certification
WEEE - Waste Electrical &
Electronic Equipment. This
machine should be disposed of
as Electrical & Electronic Waste.
(9.13)
INTENDED USE
• This power tool is intended to be used for
drilling holes with annular cutters and twist
drills in an industrial environment.
• The machine is designed to be held
onto a ferrous surface using its
electromagnetic base.
• This power tool should be used in a
weather protected environment, and be
used with the accessories provided, or
Evolution Power Tools recommended
accessories only.
• The power tool can be used vertically,
horizontally and in an inverted position,
provided the magnetic adhesion and work
environment allow.

Evolution BORA 2800 Specifications

General

Brand	Evolution
Model	BORA 2800
Category	Drill
Language	English