OPERATION AND CONTROLS
D3 Lifted User’s Manual Page15.
Be familiar with vehicle features before attempting any operations.
Check the reverse beeper ,when the direction
selecting switch be set at “REV”, it should beep
soundly
Check the tires’ surface , remove any embedded
objects you can find . Be sure no cracks or other
damages to the tires ,defective tires may cause
accident while driving .
Check the lubricant capacity the rear axle contains,
use a cleaned stick , stick it into the rear axle and
reach the bottom , pull it out check the depth.The
amount of oil should be around 0.8L.
Pull the steering wheel up and down ,check the
tightness of steering wheel .Rotate the steering
wheel right and left. Be sure no excessive free
play or rattling sound .
Check the tightness of the battery cables , make
sure all the nuts are solidly tight. Loose
nuts on the battery will cause sparks while
operating .
PRE-OPERATION SAFETY AND PERFORMACE INSPECTION
To Next Page
Loading...
Need help?
General