20 21
www.evolutionpowertools.com www.evolutionpowertools.com
EN
NL
IT
FR
EC DECLARATION OF CONFORMITY
In accordance with EN ISO 17050-1:2004
The manufacturer of the product covered by this Declaration is:
Evolution Power Tools, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
The manufacturer hereby declares that the machine as detailed in this declaration fulfils all the
relevant provisions of the Machinery Directive and other appropriate directives as detailed below.
The manufacture further declares that the machine as detailed in this declaration, where
applicable, fulfils the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
2006/42/EC. Machinery Directive.
2004/108/EC. (until Apr 19th 2016) Electromagnetic Compatibility Directive.
2014/30/EU. (starting from Apr 20th 2016) Electromagnetic Compatibility Directive.
93/68/EC. The CE Marking Directive.
2011/65/EU. The Restriction of the Use of certain Hazardous
Substances in Electrical Equipment (RoHS) Directive.
2002/96/EC as The Waste Electrical and Electronic Equipment (WEEE) Directive.
amended by
2003/108/EC .
And is in conformity with the applicable requirements of the following documents:
EN55014-1 : 2006 • EN55014-2 : 1997+A1 • EN61000-3-2 : 2006 • EN61000-3-3 : 1995+A1+A2
EN60745-1 : 2003+A1 • EN60745-2-5 : 2003 • EN60825-1 : 1994+A1+A2
Product Details
Description: RAGE 185mm (7-1/4”) MULTIPURPOSE CIRCULAR SAW
Evolution Model No: RAGE1851 / RAGE1852 / RAGE1852EU
Brand Name: EVOLUTION
Voltage: 110V / 230V ~ 50Hz
Input: 1050W
The technical documentation required to demonstrate that the product meets the requirements
of directive has been compiled and is available for inspection by the relevant enforcement
authorities, and verifies that our technical file contains the documents listed above
and that they are the correct standards for the product as detailed above.
Name and address of technical documentation holder.
Signed: Print: Matthew Gavins - Group Chief Executive
Date: 01/03/2016
NOTES
To Next Page
Loading...
Need help?
General
