Evolution RAGE Operating Instructions

1 6
Operating Instructions
Technical Helpline UK: 0870 609 2297
Important
Please read these operating and safety instructions carefully and
completely. For your own safety, before using this equipment
check that the voltage is correct and that all handles and parts are
rmly secured. If you are uncertain about any aspect of using this
equipment, please contact our Technical Helpline.
Technical Helpline USA: 1-866-EVO-TOOL
Please Keep These Instructions
Model Evolution Rage Specications
Motor (230v-240v ~ or 110v ~ 50/60 Hz) (Watts): 1050
Maximum Box ( 3mm Wall 90
0
): 55mm
Maximum Box ( 3mm Wall 45
0
): 35mm
Optimum Cutting Thickness (Mild Steel Plate): 6mm
Maximum Cutting Thickness (Wood): 25.4mm
RPM No Load (min-1): 3500
Recommended Maximum Duty Cycle (Minutes): 30
Sound Pressure Level (Under Load) (dB(A)): 100.8
Vibration Level (Under Load) (m/s
2
): 4.8
Weight: 5.5kg
Maximum Dimensions HWD: 280x395x450
Minimum Dimensions HWD: 240x260x400
Blade Dimensions
Maximum Diameter: 7-1/4” 185mm
Bore Diameter: 20mm
Thickness: 1/16” 2mm
Standard Equipment Supplied With Unit: 1 Side Handle, 1 Fence
Guide, 1 Safety Goggles, 1 Allen Wrench, 1 Carry Case, Ear Plugs, 1
MultiBlade, 1 Operating Instructions.
Ear and eye protection MUST be worn while operating this
equipment. Do NOT touch the blade while it is in motion. Always
follow the Personal Protection Equipment (PPE) recommendations
while operating this tool.
This machine is designed for cutting steel using the appropriate TCT
(Tungsten Carbide Tipped) blades and accessories. It should NOT be
modied and / or used for any application other than for which it was
intended, including powering other equipment.
Ensure that the total work area can be viewed from the operating
position. Use barriers to keep people 4 metres away, to avoid possible
ejected debris. Do not operate the tool in explosive environments – power
tools create sparks that may ignite ammable materials or gases. Do not
operate the tool in damp or wet conditions or areas, as electric shocks
may result. Always use both hands to operate the tool. Always ensure
that the material you are working on is securely clamped.
• This tool is equipped with an approved cord and plug for its intended
Country of use. The green and yellow conductor in the cord is the
grounding wire, never connect this to a live terminal.
• Remove plug from power supply before replacement of the blade,
making adjustments, or other maintenance work.
• Use only genuine EVOLUTION brand saw blades.
• Inspect the machine and blade before each use and do not use
deformed, cracked, worn or otherwise damaged blades.
• Ensure the blade is correctly mounted and is appropriate for the
material to be cut.
• Do not use blades made of high-speed steel.
• Do not use blades that do not comply with the characteristics

Evolution RAGE Specifications

General

Brand	Evolution
Model	RAGE
Category	Saw
Language	English