EasyManua.ls Logo

Evolveo StrongPhone W4 - Page 11

Evolveo StrongPhone W4
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Language settings
You can choose from five languages. Press the left button to open
the main menu.
1. Go to Settings → Phone settings → Language settings.
2. Select the desired language
3. Press OK to activate settings.
Setting the SOS function
This mobile phone is equipped with an SOS function - if you long
press the side button and hold for 1.5 seconds, the phone will
automatically call and/or send a text message to your selected
emergency contacts. If no SOS number is set, the "No trouble
number near SOS" warning will be displayed. Then you should first
set up emergency contacts.
1. Press the left button to open the main menu.
2. Go to Settings → Phone settings → SOS → SOS → On.
3. Press SOS Number - Press the middle button to select a contact
from the phone book, or press the left button to enter a phone
number. There are 4 numbers available in the list.
4. Select SOS SMS content to set the SMS content and whether to
send an SOS message after an emergency call.
5. You can also set the alarm sound status: on/off in the Alarm
sound menu.
Restore factory settings
The default password is 1234. Keep in mind that once you restore
the factory settings, everything you have stored on the device will
be erased!

Related product manuals