12
Security settings
SIM 1 (SIM2) security: In this case, that means a PIN lock. You
must enter the correct PIN code to activate the PIN lock. If you turn
on the PIN lock, you must enter your PIN every time you switch on
your mobile phone. If you enter an incorrect PIN three times in a
row, you must enter the PIN Unblocking Key (PUK). The PUK is
used to unlock and change the PIN. To get the PUK code, contact
your SIM card provider.
Phone security: This feature allows you to lock/unlock your phone.
If you enable it, you must enter the password, which defaults to
1234, every time you turn on your phone.
Profiles
This mobile phone offers several profiles: Main, Silent, Meeting,
Outside. You can tailor the settings to specific events or
environments.
Here is a customization of Normal mode for demonstration.
1. Press the left button to open the main menu.
2. Go to Profiles → Main →Selection→Activate
3. Go to Customize, where you can adjust the settings
Type of notice: Ring only, Vibrate only, Vibrate and ring, Vibrate
and then ring
Type of ringing: Repeat, Once
Ringtone: Sound 1, Sound 2....or select from the file.
Adjust the ringtone volume using the navigation button.
Report: Quiet, Tone 1, Tone 2,...Tone 5
Use the navigation button to adjust the tone volume of the
buttons .
Switching on your phone: Quiet, Tone 1, Tone 2,...Tone 5
Switching off the phone: Quiet, Tone 1, Tone 2,...Tone 5
To Next Page
Loading...
