4
**TURNING ON YOUR SCOOTER FOR THE 1
ST
TIME**
Before using your scooter for the first time, you must turn on the circuit
breaker switch which is located underneath the seat. To access the
circuit breaker, insert the key into the ignition, and without pushing in
further, turn the key counterclockwise (left). You will hear the seat latch
release, and you can now lift up the back of the seat to access the circuit
breaker.
(If you’re having trouble getting the seat latch to release, please double
check that you are not pushing the key inwards while trying to turn left)
To Next Page
Loading...
