6. You can a) obtain a static leased DCHP address or b) set the IP address at the host.
NOTE
You must configure a static lease at your DHCP server if you are serving addresses from DCHP.
Otherwise, edit records in the nmtui UI.
a. For a DCHP address assignment:
i. Open the menu next to IPv4 and select Automatic.
ii. Ensure IPv6 is configured as Ignore.
b. For persistent address assignment at the host:
i. Open the menu next to IPv4 and select Manual.
ii. Choose to <Show> the IPv4 details:
iii. Enter the IPv4 Addresses and Gateway.
Exabeam Appliance Network Conguration
Exabeam Appliance Setup Guide - Version SMP 2019
Published Mar 15, 2021 16
To Next Page
Loading...